One of the biggest problems in Azure security is not a lack of data. It is that the data you need is often spread across too many places.

When a suspicious sign-in, risky identity, privileged role change, or unusual application activity appears, the first few minutes of an investigation can disappear into portal navigation. You open Microsoft Entra sign-in logs, pivot to audit logs, check Identity Protection, move into Log Analytics, adjust the time range, rebuild a query you used last week, and then try to reconstruct the story.

The security signal may be obvious. The investigation path is not.

I reduced that initial Azure security investigation workflow by roughly 90% by standardizing three things: where the identity data lands, which KQL questions get asked first, and how the results are presented to the investigator.

Important context: The exact time savings will vary by tenant size, licensing, telemetry, and the type of incident. The point is not that every investigation becomes automatic. The point is that repeatable triage should not require rebuilding the same investigation from scratch every time.

Why Azure Security Investigations Take Too Long

Most Microsoft Entra ID investigations slow down for reasons that have very little to do with the complexity of the attack. The delay usually comes from workflow friction.

  • Portal hopping: Sign-ins, audit events, risk data, application activity, Conditional Access results, and Azure logs are reviewed in separate views.
  • Recreating queries: Analysts repeatedly write or modify the same KQL to answer common questions.
  • Inconsistent time windows: One screen is looking at 24 hours while another is looking at seven days.
  • Too much raw data: Thousands of events are available, but the investigator still has to decide which signals matter first.
  • No shared investigation baseline: Two engineers can investigate the same identity and take completely different paths.

Microsoft supports streaming Entra activity logs into Azure Monitor so sign-in and audit activity can be queried centrally in Log Analytics. That centralization is the foundation of the faster workflow.

The Workflow That Changed Everything

My goal was simple: when something looks wrong, I want to answer the first five or six security questions in one place before I start a deep investigation.

That led to a repeatable model:

  1. Centralize the relevant identity telemetry in Log Analytics.
  2. Create reusable KQL queries for the questions you ask in almost every investigation.
  3. Surface those queries in an Azure Monitor Workbook.
  4. Prioritize high-signal identity and access risks before reviewing low-value noise.
  5. Pivot into the native portals or Microsoft Sentinel only when the evidence justifies a deeper investigation.

1. Centralize Microsoft Entra ID Logs in Log Analytics

The first improvement is architectural: stop making every investigation begin in a different portal.

Microsoft Entra diagnostic settings can send activity logs to a Log Analytics workspace. Once those logs are available centrally, you can use KQL to search, filter, correlate, summarize, and visualize the data instead of relying only on point-and-click filtering.

For identity-focused investigations, the core data sources usually include:

  • Sign-in activity, including interactive user sign-ins
  • Audit activity, including changes to users, groups, applications, and roles
  • Risk-related identity signals when the required Microsoft Entra licensing and log sources are available
  • Service principal and non-interactive sign-in activity when those log categories are collected

This does not mean every security data source has to be copied into one giant workspace. It means the logs required for your standard identity investigation path should be queryable consistently.

2. Turn Repeated Investigation Questions into KQL

The second improvement is the biggest time saver: stop treating common investigation questions as one-off searches.

If you routinely ask the same question, turn it into a saved query or workbook component.

Example: What happened around this user?

let TargetUser = "user@contoso.com";
let Lookback = 24h;
SigninLogs
| where TimeGenerated >= ago(Lookback)
| where UserPrincipalName =~ TargetUser
| project TimeGenerated, UserPrincipalName, AppDisplayName, IPAddress,
          Location, ResultType, ResultDescription, ConditionalAccessStatus,
          RiskLevelDuringSignIn, RiskState
| order by TimeGenerated desc

That query immediately gives the investigator a timeline for the identity instead of requiring multiple filters in the portal.

Example: Which sign-ins deserve attention first?

SigninLogs
| where TimeGenerated >= ago(24h)
| where RiskLevelDuringSignIn in ("medium", "high")
    or RiskState in ("atRisk", "confirmedCompromised")
| project TimeGenerated, UserPrincipalName, AppDisplayName, IPAddress,
          Location, RiskLevelDuringSignIn, RiskState, ConditionalAccessStatus
| order by TimeGenerated desc

The exact risk fields and available data depend on your tenant configuration and licensing, but the investigation pattern is what matters: filter for high-signal events first, then expand.

Example: Were there recent privileged changes?

AuditLogs
| where TimeGenerated >= ago(24h)
| where Category =~ "RoleManagement"
| project TimeGenerated, OperationName, Result, InitiatedBy, TargetResources
| order by TimeGenerated desc

If a suspicious sign-in is followed by a privileged role change, the investigation priority changes immediately. That is exactly the kind of relationship you want to surface quickly.

Example: Who is generating repeated sign-in failures?

SigninLogs
| where TimeGenerated >= ago(24h)
| where ResultType != 0
| summarize FailedSignIns=count(),
            DistinctIPs=dcount(IPAddress),
            Apps=make_set(AppDisplayName, 10)
    by UserPrincipalName
| order by FailedSignIns desc

This is not a complete detection by itself. It is a fast triage view that helps you decide where to investigate next.

3. Put the Investigation Path in an Azure Monitor Workbook

Saved KQL is useful. A workbook is better because it turns the queries into an investigation interface.

Azure Monitor Workbooks can query Log Analytics data and present the results as grids, charts, text, parameters, and drill-down views. That lets you build one security-focused page where the investigator can choose a time range, user, subscription, or workspace and immediately see the most important evidence.

A useful first-pass identity investigation workbook should answer questions such as:

  • Are there risky or suspicious sign-ins? Risk level, IP address, location, and Conditional Access status
  • Is MFA exposure part of the problem? Authentication and sign-in context
  • Did privileged access change recently? RoleManagement audit events
  • Is legacy authentication still appearing? Client/app authentication patterns
  • Did an application or service principal behave unusually? Workload identity sign-ins and application activity
  • Was consent or another sensitive directory change made? Audit activity and application changes

The key is not to create a dashboard with 50 charts. The key is to create a triage surface that puts the highest-value evidence in the investigator's path.

4. Use a Consistent Investigation Order

A fast investigation is not just about faster queries. It is also about asking the questions in the right order.

My default order for an identity-focused Azure security investigation is:

  1. Confirm the identity, time range, application, IP address, and sign-in result.
  2. Check risk indicators and Conditional Access outcome.
  3. Look for repeated failures, unfamiliar locations, unusual applications, or changes in sign-in behavior.
  4. Check recent privileged role activity and sensitive audit events.
  5. Review service principal or application activity if the user or incident touches workload identities.
  6. Escalate to deeper hunting, endpoint evidence, Microsoft Defender, or Microsoft Sentinel when the initial evidence warrants it.

This order reduces the temptation to chase every anomaly before you know whether it is actually related to the incident.

5. Separate Triage from Deep Investigation

This distinction is important. Azure Monitor Workbooks and KQL can dramatically accelerate triage, but they do not replace a full SIEM, incident response process, endpoint investigation, or forensic analysis.

The purpose of the fast workflow is to answer:

  • Is this event likely benign or suspicious?
  • What identity, application, IP, or change is involved?
  • Is privileged access involved?
  • What should I investigate next?
  • Does this need escalation right now?

If the answer is yes, then move into the deeper tools with a much clearer hypothesis. That is where the time savings compound: you are no longer opening Sentinel, Defender, or another security platform just to figure out what question to ask.

A Realistic Example: Suspicious Sign-In Triage

Imagine you receive a report of an unusual sign-in for a privileged user.

The slow path often looks like this: open the Entra portal, find the user, locate the sign-in, change the date filter, inspect the IP, check risk, open Conditional Access details, move to audit logs, search for role changes, then jump into Log Analytics if you need more context.

The standardized path is different:

  1. Open the security investigation workbook.
  2. Set the time range and filter to the user.
  3. Review risky sign-ins, failures, location/IP context, and Conditional Access status.
  4. Review recent directory and privileged role changes for the same window.
  5. Pivot to deeper investigation only if the evidence indicates compromise or meaningful risk.

In my workflow, that change removed most of the repetitive navigation and query-building from the initial investigation. The analyst spends time interpreting evidence instead of searching for it.

The Biggest Lesson: Security Data Is Not the Same as Security Visibility

Azure and Microsoft Entra ID can generate a huge amount of useful security telemetry. But having the telemetry does not automatically make investigations fast.

Visibility improves when the data is:

  • Centralized enough to query consistently
  • Reduced to a small set of high-value investigation signals
  • Mapped to repeatable questions
  • Presented in a workflow that guides the investigator
  • Easy to drill into when something actually looks suspicious

That is the difference between having logs and having an investigation system.

How AzureWise Applies This Approach

This investigation model is also the thinking behind the AzureWise Identity Security Assessment.

AzureWise is built as an Azure Monitor Workbook that uses pre-built KQL to turn Microsoft Entra ID telemetry into a security-focused assessment inside your own Azure environment. Instead of starting with blank Log Analytics tabs and rebuilding the same security views, you get a deployable starting point for identity security visibility.

The toolkit focuses on practical areas such as:

  • MFA coverage and identity exposure
  • Risky and suspicious sign-ins
  • Legacy authentication
  • Privileged role changes and recent privileged activity
  • Service principal sign-ins and workload identity visibility
  • OAuth/application consent activity
  • Users without MFA and other actionable identity risks

The product is designed to be operationally simple:

  • Runs inside your Azure environment using your Log Analytics data.
  • Read-only assessment: it does not change users, policies, permissions, or applications.
  • Your security data stays in your environment; AzureWise does not require access to your tenant.
  • Includes the Azure Monitor Workbook JSON plus documentation and a KQL query library for transparency and customization.
  • One-time license rather than another recurring per-user security subscription.

Want the investigation framework without building every view from scratch?

The AzureWise Identity Security Assessment is available as a one-time $99 license. Deploy the workbook, connect it to your Log Analytics workspace, and use the included KQL-driven views to assess Microsoft Entra ID security posture and accelerate investigation triage.

>

View the AzureWise Identity Security Assessment | Pricing & Licensing

How to Start Reducing Azure Investigation Time Today

You do not need to redesign your entire security stack to make investigations faster. Start with the repeated work.

  1. Pick the five investigation questions your team asks most often.
  2. Confirm the required Microsoft Entra ID logs are available in Log Analytics.
  3. Write and validate one KQL query for each question.
  4. Put the results into a simple Azure Monitor Workbook with consistent parameters.
  5. Run the same triage sequence for every relevant alert for a few weeks.
  6. Measure where analysts still lose time, then add only the views that solve those bottlenecks.

The goal is not more dashboards. The goal is less friction between an alert and an informed decision.

FAQ: Azure Security Investigations, KQL, and Workbooks

How do you investigate security incidents in Azure?

Start by defining the identity, resource, application, and time window involved. For Microsoft Entra ID incidents, review sign-in activity, risk indicators, Conditional Access results, audit activity, and privileged changes. Centralizing the relevant logs in Log Analytics makes those checks easier to query and correlate.

Can Microsoft Entra ID logs be queried with KQL?

Yes. When Entra activity logs are sent to a Log Analytics workspace through diagnostic settings, you can query the available log tables using Kusto Query Language (KQL).

What is an Azure Monitor Workbook?

An Azure Monitor Workbook is a customizable reporting and visualization experience that can query Azure Monitor and Log Analytics data. Workbooks can combine parameters, KQL queries, grids, charts, and text into a reusable operational view.

Do Azure Monitor Workbooks replace Microsoft Sentinel?

No. A workbook can be excellent for visibility, assessment, and investigation triage, but Microsoft Sentinel provides broader SIEM capabilities such as incident management, analytics rules, threat hunting, automation, and cross-source security correlation.

How does KQL reduce security investigation time?

KQL reduces repeated manual filtering by turning common investigation questions into reusable queries. Once those queries are validated and placed in a workbook, the investigator can spend more time interpreting evidence and less time rebuilding searches.

What is the fastest way to improve Microsoft Entra ID security visibility?

Start by ensuring the right activity logs are retained and queryable, then create a small number of high-value views for risky sign-ins, identity exposure, privileged changes, application activity, and other signals that matter to your environment.

Final Takeaway

The biggest improvement I made to Azure security investigations was not adding another product. It was eliminating repeated work.

Centralized identity telemetry, reusable KQL, a focused Azure Monitor Workbook, and a consistent triage order turned a fragmented process into a repeatable workflow. That is where the 90% reduction came from: not by skipping investigation steps, but by removing the time spent finding the same evidence over and over again.

If your team is still starting every Microsoft Entra ID investigation with portal hopping and blank query windows, standardizing the first five minutes of the investigation is one of the highest-leverage improvements you can make.

AzureWise helps security and cloud teams turn Microsoft Entra ID telemetry into practical, actionable visibility inside Azure Monitor.

Learn more about AzureWise

Microsoft References

Put the guidance into practice

Want the Azure identity assessment already built?

AzureWise Identity Security Assessment turns Microsoft Entra ID telemetry into a weighted Security Rating, detailed findings, and prioritized remediation guidance inside Azure Monitor.

Get AzureWise — $99